20 Pcs Stainless Steel Corner Braces, FineGood 10 Pcs 40 x 40mm 90 Degree Right Angle L-Shaped Bracket Joint and 4 Pcs Plat Braces Fastener for Wood Shelf Cabinet Chair Table, with 80 Screws

Please Note:
With a protective cover on one side, please remove it before installation.

The bracket is better to use in home, factory and office for bracing the corners.

Right Angle Bracket:
Material: Stainless Steel
Color: Silver
Quantity: 16 Pieces
Bracket Size: 40 * 40 * 16 mm / 1.55 * 1.55 * 0.65 inch
Hole Diameter: 4 Holes, 5mm/ 0.2inch

Plate Straight Bracket:
Material: Stainless Steel
Color: Silver
Quantity: 4 Pieces
Size: 76 x 16 x 2mm/2.99x 0.62x 0.07inch
Hole Diameter: 4 Holes, 5mm/ 0.2inch

Packing List:
16 x Right Angle Bracket
4 x Plate Bracket
80 x Screws

Product Features

  • FUNCTION: The corner brace is to reinforce corner joint. Use a drill bit while drilling screws into woods.
  • RIGHT ANGLE BRACE: 90 degree angle bracket, can be used to build a frame, serve as a corner connected, like fastening chair, wooden table, wooden bed, windows, shelf, furniture, etc.
  • PLAT STRAIGHT BRACE: The flat braces can be applied in many different places to enforce flat angle joints, such as chests, screens, windows and beds.
  • MATERIAl: Stainless Steel. Sturdy and Durable. Heavy duty and thick design.
  • SIZE: 16 Pcs Right Angle Brace (40 * 40 * 16 mm / 1.55 * 1.55 * 0.65 inch). 4 Pcs Plate Straight Brace (76 x 16 x 2mm/2.99x 0.62x 0.07inch); Hole Diameter (5mm/ 0.2inch).

Detailed information available on our homepage…

Folding Shelf Brackets Claiery Polished Bench Table Stainless Steel Foldable K Type Shelf Wall Brackets Heavy Duty 20inch

[Features]: Foldable, heavy-duty, space-saving, and versatile.
The folding brackets are ideal for many DIY jobs around the home, saving money while saving space. Foldable brackets can be installed in kitchens, restaurants, rooms, shops, workshops, boats, RVs, backyards, trailers, balconies, bathrooms, garages, and can also be used to make TV stands, bookshelves, folding stools, work benches, air conditioning frames, Booths, garden frames, laminated brackets, etc.

[Product Name]: Folding bracket
[Material]: Stainless steel
[Surface treatment]: brushed
[Installation method]: screw fixing
[Dimensions]: as shown in Figure L-20inches (490mm) H-6.7inches (175mm) W-1inches (25mm)
[Maximum load capacity]: 330lb / 150kg
[Weight]: 1.37kg / 3lbs.
[Color]: silver gray
[Packing]: boxed
[Package Contents]:
Bracket* 2
M4-16 screw* 8
M5-40 screw* 6
M8-40 expansion tube* 6

[WARM REMINDER]:
Product does not include wood
The installation should be level and the screws installed in place to avoid loosening.
During use, the load-bearing limits of the bracket, the strength of the wall and the thickness of the panel should be considered to avoid overloading the bracket and damage to the wall or panel.
Recommended that the width size of the wood board should not exceed 2 inch of the stainless steel bracket .
The number of folding brackets can be increased according to the length of the panel, which can increase the carrying capacity
Please keep dry and clean,Long-term humidity will shorten the service life

Product Features

  • ★SPACE SAVING: The folding bracket requires only one mounting surface and takes up very little space. You can use these brackets to extend the workbench of the garage, laundry, kitchen, garage, boat, front desk, backyard, RV, grill, trailer, bedroom, balcony, bathroom, etc. Folding it when not in use saves most of the space.
  • ★EASY TO INSTALL: Even if you are not good at DIY, it is easy to install. It contains matching mounting hardware, high quality stainless steel screws and expansion tubes. There are 3 screw mounting holes on the short arm. Corresponding long screws and expansion tubes are used to secure the bracket to the wall. There are 4 screw mounting holes on the long arm, and the corresponding short screws are used to fix the partition to the bracket.
  • ★RUGGED&DURABLE: Made of high quality stainless steel with good corrosion resistance and rust resistance. No coating, no paint, easy to clean, wire drawing process, can prevent daily scratches, and keep bright as new.
  • ★FULL RANGE OF MODELS &POWERFUL SUPPORT: Models include 8″ / 10″ / 12″ / 14″ / 16″ / 18″ / 20″ folding brackets to meet different size requirements! Support weights up to 330lb / 150kg.
  • ★QUALITY WARRANTY & MONEY BACK GUARANTEE:If you have any quality problems with the products you received, or if you think the product is inconsistent with our description, please feel free to contact us, we will provide you with an unconditional refund or exchange,you do not need to bear any losses. Please rest assured to buy.

Visit the website for more information…

Folding Shelf Bracket – Bench Table Folding Shelf or Bracket, Max. Load 330lbs ( long release handle), (Sold In Pairs)

DIY – 2PCS SHELF-BRACKET (Brace) L = 12″, H = 6.5″, 304 Stainless Steel Max. Load 330lbs (LONG release handle),100% GENUINE MARINE Quality.

Bracket bolts to the wall and hinges outward providing an extremely sturdy support for your table or bench.

Come with easy-release arm without pinching your hands or fingers.

Space saving : When you want to collapse the table simply press the release arm. Excellent performance suitable for tight spaces when you want a work surface that can be folded down and out of the way. Helps keep your room organized.

Functions well with easy installation.Suitable for shop, stores, workshops, boats and household as a support bracket.

Fit for harsh salt water environment makes it applicable to marine boat,providing you a portable condition.

Ideal for temporary boat shelves and tables were space is limited.

Product Features

  • Spec: Bracket L = 12″, H = 6.5″, Supports Max. Load 330 lbs, includes LONG Release Arm for ease of use
  • Material: 304 Stainless Steel
  • Finish: Polished Mirror Finish
  • The BEST ROBUST Shelf Bracket on the Market Today!
  • 100% Genuine Marine Quality

Click Here For More Information