Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Universal L-Bracket for mirrorless and DSLR cameras
Choice of two screw mount slots for optimal positioning of the camera
Adjustable base length thanks to rigid stainless steel rods held in place with stainless steel screws
Rear of base plate is sloped to better enable screen access
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Precision milled from a single block of aircraft-grade alloy, Zelda gives full access to the battery door, memory card slot, and side ports with the bracket in place. The Arca-Swiss compatible L-Bracket has been shaped with cut-outs to allow users to easily access and tilt the camera’s rear screen, and provide easy access to the lens release button on the front of the unit.
Stainless Steel ¼”-20 Stagsden screw mount for direct connection to camera
Shaped to give access to side ports, memory card slot, and battery door
Locator pin in the base for secure fit to Nikon Z cameras
Shaped cut-outs to give easy access to tilting rear screen and lens release button
¼”-20 thread in vertical aspect for attachment of accessories
Designed to make flipping the camera from portrait to landscape mode, the orange-finished QR11-LC Universal L-Bracket from 3 Legged Thing is useable with a wide variety of cameras including Nikon, Canon, Sony, Fuji, Olympus, and Pentax. Compatible with Arca Swiss or Arca Swiss-type quick releases, each side of the 2-piece bracket has an Arca 45-degree dovetail to make switching from horizontal to vertical and back fast and secure. The bracket has a 1/4″-20 accessory mount and a base length of 4.3″.
Full Compatibility – full access to battery and cable doors: Canon: 760D, 80D Nikon: D3300, D3400, D5300, D5500, D5600, D500, D610, D700, D7000, D7100, D800, D810
Slightly Limited Compatibility – a small adjustment, enable access to battery, cable door, or both: Canon: 5D II, 5D III, 5D IV, 6D, 7D, 7D II, 700D, 750D Nikon: D750
Partial Compatibility – access to the cable and battery doors is impeded: Canon: 100D, 1300D, M3, M5 Nikon: 1V3, 1J5 Sony: A68, A77, A99, A99ii, A5000, A6000, A6300, A6500, A7, A7ii, A7r, A7s Fuji: X100/S/T, X-E2/S, XT1, XT2, XT10 Olympus: E-M1, E-M1 II, E-M10 II, E-M5 II, E-PL7, E-PL8, PEN-F Pentax: K-1, K-3 II, K-50, K-70, K-S2
2-Piece L-Bracket, 1/4″-20 Side Mount, Precision Engineered
Both Bracket Sides are Arca-Compatible, Base Length: 4.3″ (110 mm)